AL Series (UNC) Large Thin Flange / Splined / Open end Highest resistance to vibration and spin-out of all round bodied inserts. Flange with near flush finish. Very wide grip range. Low torque required to install. Material: Low carbon steel Finish: Zinc clear Cr3 Thread Size Part Code Grip Hole A B C D Push Out Pull Out Ultimate Torque mm mm mm mm mm mm Kgf Kgf Kgf.cm 3/16” IN-YLF1024-130 0.5-3.3 7.6 7.5 12.9 10.6 0.8 – – – 1/4” IN-YLF420-15 0.7-4.2 10.0 9.9 15.5 12.7 0.8 390 1000 150 5/16” IN-YLF518-15 0.7-3.8 13.5 13.5 18.4 17.4 0.9 660 2100 260 3/8” IN-YLF616-15 0.7-3.9 13.5 13.5 18.4 17.4 0.9 660 2100 510 Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. www.rivetlab.com 11 LEETS