DRAWER SYSTEMS & RUNNERS 203 Ball Bearing Slides Technical Specifications Full Extension Soft Close Load Class 60kg E 35.10 6.00 5.00(2X) 9.5X4.6 (TYP) D A Note: Refer to page 196. 1.80 5.1(TYP) 15.70(TYP) 11.90 6.4(TYP) 11.90(TYP) 27.60 40.30 SL±0.25 P 2 - 0 58 A 15.80 9.40(TYP) 1.80 A 16.00 B C 50.80 TL1±3.00 6.00 TL2±3.00 1.00 5.00 2.0 0.6 SOFT CL CLOSE 5.1 +0.5 -0 1.8 DETAIL A 12.7 Profile Component Parts Technical Specifications for drawer or pull-out shelf 1 – Drawer or pull-out shelf must be at least 13.0 mm narrower than cabinet opening on each side. (DIM A) 2 – Bottom of drawer or pull-out shelf bottom shall have 6.4 mm or 1/4” minimum clearance from the bottom of Cabinet. (DIM B) 13mm/home/webapps/asp_au/data/asp/publications/nover/nover-catalogue-2017-lr-complete-for-flip-book13.5mm (DIM A) 3 – Mark a center line with proper height ( H ) from the bottom of cabinet. (DIM C) 4 – Mark a center line with proper height (H-6.4 mm) from the bottom of drawer. (DIM D) H-6.4mm H (DIM D) 6.4mm (DIM C) (DIM B) & RUNNERS DRAWER SYSTEMS LC 00.03 5.456.01°09N1 4.60