DRAWER SYSTEMS & RUNNERS 207 Ball Bearing Slides Technical Specifications Full Extension Standard Load Class 45kg 3.0 A ±0.25 E F G H I J 11.4(TYP) 35.0 60.5 20.9 8.9 12.65 10.7 1.50 26.0 11.2 21.6 6.0 12.7 12.7 4.6*5.3 6.0 8.9 (TYP) 35.1 128.0 4.6 6.4 9.5* 4.6 D 12.7 (TYP) C B 480.0 35.1 32.0 Profile For 55mm ONLY Technical Specifications for drawer or pull-out shelf 1 – Drawer or pull-out shelf must be at least 12.7 mm narrower than cabinet opening on each side. (DIM A) 2 – Bottom of drawer or pull-out shelf bottom shall have 6.4 mm minimum clearance from the bottom of cabinet. (DIM B) 12.7mm Note: Refer to page 198. (DIM A) 3 – Mark a 61 mm line from the bottom of cabinet. (DIM C) 4 – Mark a 44 mm line from the bottom of drawer. (DIM D) 44.5mm 61mm (DIM D) (DIM C) 6.4mm (DIM B) & RUNNERS DRAWER SYSTEMS 7.54