DRAWER SYSTEMS & RUNNERS BALL BEARING SLIDES Technical Specifications SOFT CLOSE FULL EXTENSION SOFT CLOSE LOAD CLASS 45KG Note: Refer to page 151 for product overview. Refer to dril ling table on page 166 for positioning. TECHNICAL SPECIFICATIONS FOR DRAWER OR PULL-OUT SHELF 1 – Side clearance between drawer and cabinet must be a minimum of 12.7mm to a maximum of 13.5mm on each side. (DIM A) 2 – Bottom of drawer or pull-out shelf bottom shall have a minimum clearance of 6.4mm from the bottom of the cabinet. (DIM B) 12.7mm Front view of drawer (DIM A) 3 – Mark a 61mm line from the bottom of cabinet. (DIM C) 4 – Mark a 44.5mm line from the bottom of the drawer. (DIM D) Side view of cabinet Drawer side 44.5mm 61mm (DIM D) 6.4mm (DIM B) (DIM C) 156 www.nover.com.au SMETSYS REWARD SRENNUR &