DRAWER SYSTEMS & RUNNERS BALL BEARING SLIDES Technical Specifications HEAVY DUTY FULL EXTENSION HEAVY DUTY LOAD CLASS 180KG Note: Refer to page 155 for product overview. Refer to dril ling table on page 167 for positioning. G F 1.3[0.76] E Q D1 P D N 19.0[0.75] H B 28.6[1.13] M 19.0[0.75] A 28.6[1.13] 31.8[1.25] 25.4[1.00] 19.0[0.75] 57.1[2.25] 19.0[0.75] 15.9*5.2[0.63*0.2] 19.1[0.75] 5.2*11.6[0.2*0.46] 4.0[0.16] 17.5[0.69] 69.9[2.75] SL 9.5* 5.2[0.37* 0.2](TYP) TL±3.0[0.12] 19.3[0.76] B A 25.4[1.0] 19.0[0.75] 5.*11.6[0.2*0.46] 9.[2.7] Profile TECHNICAL SPECIFICATIONS FOR DRAWER OR PULL-OUT SHELF 1 – Drawer or pull-out shelf side clearance must be at least 19.30mm. (DIM A) 2 – Bottom of drawer or pull-out shelf bottom shall have 6.4mm minimum clearance from the bottom of Cabinet. (DIM B) 19mm (DIM A) 3 – Mark a centre line with proper height ( H ) from the bottom of cabinet. (DIM C) 4 – Mark a centre line with proper height (H-6.4mm) from the bottom of drawer. (DIM D) (H-6.4mm) (H) (DIM D) 1/4"(6.4mm) (DIM B) (DIM C) 164 www.nover.com.au 71.[0.28]