GENERAL PANELS, EDGING & LAMINATES MR MDF VENEER MR MDF G1S DGB Veneer Board FEATURES Size: 2400MM X 1200MM X 17MM Other species & substrates available on request G1S = Good one side MATCHING VENEER EDGING DGB = Down-grade back FEATURES Good both sides available on request Size: 22MM X 100M - Unglued DESCRIPTION CODE DESCRIPTION CODE AMERICAN OAK 140112 AMERICAN OAK 211217 JARRAH 140119 JARRAH 211377 NATURAL GRADE TASMANIAN OAK 140100 NATURAL GRADE TASMANIAN OAK 211557 TASMANIAN BLACKWOOD 140106 TASMANIAN BLACKWOOD 211297 Grooved Panels FEATURES Size:2400MM X 1200MM & 1200MM X 2400MM Thickness: 18mm Note: When ordering made-to-order grooved panel, please stipulate the fol lowing: • Colour & brand of board • Distance between grooving centres • Is there a half groove required on the edge of the sheet? • Groove direction (length or across the sheet) • Number of sheets required • Quantity of extrusion required Note: Not al l colours/brands are available in 18MM substrate Grooved length of sheet Grooved width of sheet 2400mm x 1200mm 1200mm x 2400mm 2400MM X 1200MM (GROOVES RUNNING LENGTH OF SHEET) 2400mm 1200mm DESCRIPTION CODE WHITE 100MM CENTRES (NO HALF GROOVE) 190110 WHITE 100MM CENTRES (WITH HALF GROOVE) 190110N 1200MM X 2400MM (GROOVES RUNNING WIDTH OF SHEET) DESCRIPTION CODE WHITE 100MM CENTRES (WITH HALF GROOVE) 190115N Note: 75mm, 100mm or PANEL EXTRUSION 2400MM ALUMINIUM 190900 150mm CTC (centre to centre) options available. EXTRUSION QUANTITY PER SHEET 100MM CENTRES WITH NO HALF GROOVE: 11 LENGTHS OF EXTRUSION REQUIRED 100MM CENTRES WITH HALF GROOVE: 23 LENGTHS OF EXTRUSION REQUIRED WHEN SHEETS ARE JOINED 100MM CENTRES WITH GROOVES ACROSS THE WIDTH: 11 LENGTHS OF EXTRUSION REQUIRED 150MM CENTRES WITH HALF GROOVE: 15 LENGTHS OF EXTRUSION REQUIRED 150MM CENTRES WITH GROOVES ACROSS THE WIDTH: 190900 8 LENGTHS OF EXTRUSION REQUIRED 80 www.nover.com.au 1200mm2400mm ,SLENAP LARENEGSETANIMAL & GNIGDE