ADHESIVES & CLEANERS HOT MELT ADHESIVES Rakoll Hot Melt Adhesive K4/570N FEATURES Application: Rakol l hot melt adhesive K4/570 can be used for most types of edge strips which have been tested by the edge strip manufacturers & approved for the hot melt edgebanding method Characteristics: Rakol l hot melt adhesive K4/570 is an EVA based synthetic resin with good working properties that can be used on edge banders The adhesive melts & flows wel l. It is clean in use & non-stringing Rakol l hot melt adhesive K4/570 exhibits good bonding properties in connection with decorative laminate edge strips DESCRIPTION CODE RAKOLL HOT MELT GLUE NATURAL K4/570N 15KG 526601 RAKOLL HOT MELT GLUE WHITE K4/570W 15KG 526602 Jowat Hot Melt Adhesive 286.30 FEATURES Type: Jowatherm special cartridges for HOLZ-HER machines Application: Wide area of application, e.g. for edges made of veneer, solid wood, polyester, PP, ABS, PVC & resinated paper Characteristics: Good adhesion properties, low melt viscosity, good oxidation & colour stability in the melt. The product has a wide range of possible applications due to its good heat-resistance & long hot tack. Customer trials before use are recommended Packaging: 48 cartridges per carton, 63mm x 80mm long DESCRIPTION CODE JOWAT HOT MELT UNFILLED SLUG 286.30 12.2KG 526603 Jowat Hot Melt Adhesive 284.70 FEATURES Application: For automatic edgebanders, suitable for bonding veneer, resinated paper edges, PVC, Polyester & melamine resin edges Characteristics: Low melt viscosity, short initial & subsequent melt times, good adhesion as wel l as good oxidation and colour stability in melt. Customer trials before use are recommended Packaging: Granulate DESCRIPTION CODE JOWAT HOT MELT GLUE 284.70 25KG 526595 www.nover.com.au 661 CLEANERSADHESIVES &