176 DRAWER SYSTEMS & RUNNERS Bal l Bearing Slides Technical Specifications FULL EXTENSION SOFT CLOSE LOAD CLASS 45KG SOFT CLOSE Note: Refer to page 170 for product overview. Refer to dril ling table on page 186 for positioning. Technical Specifications for drawer or pull-out shelf 1 – Side clearance between drawer and cabinet must be a minimum of 12.7mm to a maximum of 13.5mm on each side. (DIM A) 2 – Bottom of drawer or pull-out shelf bottom shall have a minimum clearance of 6.4mm from the bottom of the cabinet. (DIM B) 12.7mm Front view of drawer (DIM A) 3 – Mark a 61mm line from the bottom of cabinet. (DIM C) 4 – Mark a 44.5mm line from the bottom of the drawer. (DIM D) Side view of cabinet Drawer side 44.5mm 61mm (DIM D) 6.4mm (DIM B) (DIM C) SMETSYS REWARD SRENNUR &