DRAWER SYSTEMS & RUNNERS 177 FULL EXTENSION SOFT CLOSE LOAD CLASS 45KG INSTALLATION INSTRUCTIONS Note: For proper performance, ensure slides are mounted paral lel to each other vertical ly & horizontal ly. A – To separate the drawer member from the cabinet member, press the release trigger and then pull the unit all the way out until it’s disconnected. To separate the inner member from the outer member, push the yellow button down and then pull the inner member all the way out until it is disconnected . NOTE: VERY IMPORTANT! Screws MUST be flush under the drawer member through the star shaped holes or else it may cause self close to malfunction. Leave the screws loose for final adjustment. B – Make sure the bearing retainers are fully forward. Insert drawer member into the cabinet member, and then close the drawer completely. Make sure retainer i s fully forward Insert drawer member into cabinet member Final Adjustments 1. Try to open and close the drawer to see if the slides function correctly and make sure no screws are interfering during opening and closing of the drawer. Drawers should move smoothly without any binding. There may be some resistance during the first time when balls in the retainer are being synchronized. 2. I f the drawer functions correctly, secure the screws and install additional screws if necessary. If not, make necessary adjustments until the slides function correctly. *This instruction is for reference only. It may vary due to different applications. & RUNNERSDRAWER SYSTEMS