92 DECORATIVE PANELS, LAMINATES & SURFACES AliPro Cutting and Installation CUTTIeNG INSTALLI NG The fol lowing equipment is suitable for cutting Silicone caulking gun AliPro panels: a Neutral cure silicone adhesive or Sikaflex 11FCr in a on brickworkF ri Circular saw with fine tooth carbide tipped blades 12.5mm minimum width rubber based adhesive lfor aluminium or plastic usei r i ini i d al t al i i d masking tape (e.g. 3M Scotchtape 4008)(i Panel or table saw with aluminium carbide bladersa Personal protective equipment (eye, hands, hearing, Hand router using high speed TC blade footwear, clothing Hole saw or dril l using HSS dril l bitsir Jigsaw using aluminium blade onlyrill i Fine and medium grit sandpaper and sanding blocklal i or power planner Note: AliPro is best fabricated on a solid work platform 3mm Gap on (e.g. bench or stable board). the wall and bench top Always clamp the sheet o ac Please ensure a sacrificial board to minimiset s 110mm clearance from vibrations. AliPro to the naked flame in a gas cooktop application 20mm Gap between cooktop and AliPro TABLE 1 TOOL CUTTING DIRECTIONPLACE THE CHOSEN DECORATED FACE OF THE PANEL: CIRCULAR SAW UPWARD DOWNWARD TABLE SAW DOWNWARD UPWARD JIGSAW UPWARD DOWNWARD HOLE DOWNWARD UPWARD SAW/DRILL i Tip Before using your skil l saw or jig saw to cut the AliPro panel it is advisable to adhere cloth tape or multiple layers of maskingttto tose rl tape to the base of the tool to protect the surface. ,SLENAP EVITAROCEDSECAFRUS & SETANIMAL