HSS ANNULAR CUTTERS Annular Cutters achieve burr-free finished holes without the need for pre-drilling or step drilling. They are faster and more accurate than using standard HSS twist drills. Bordo HSS Annular Cutters feature a multi-fit shank which allows them to be used with most brands of mag based drill. These M2AL material cutters have a high hardness for prolonged tool life. The proprietary hardening process used in the manufacture of these cutters ensures that the cutting tips are extremely hard and durable while the remainder of the cutter is more flexible and resists breakage. The multi-cut tooth geometry and internal relief improves smoothness of the cut hole and ensures a more efficient and chatter free performance. The precision ground flutes run the entire length of the cu tter providing efficient chip removal. Features: - Increased cutting speed. - Close tolerance drilling without runout creates reamed quality, burr free finished holes. - Resharpenable. Range: - Cutter depths of 25, 50, 75 & 100mm. - Cutter diameters from 12mm up to 60mm. TCT ANNULAR CUTTERS AND TCT RAIL CUTTERS TCT Annular Cutters are ideally suited to cutting hard and difficult material such as Bisalloy, stainless steel, Inconel and Hardox. Features: - Increased cutting speed. - Reduced tooth load and minimized tool wear for extended tool life. - Close tolerance drilling without runout. - Creates reamed quality, burr free finished holes. TCT Range: - Cutter depths of 25, 50, 75 and 100mm. - Cutter diameters from 14mm up to 60mm. TCT Rail Cutter Range: - Cutter depths of 25mm. - Cutter diameters from 18mm up to 35mm. ANNULAR CUTTER HSS ANNULAR CUTTER TWIST DRILLS HSS COUNTERSINKS These twist drills can be used directly in These premium quality HSS countersinks Mag based drilling machines. They utilise can be used directly in Mag based drilling the existing spindle coolant system of machines. magnetic based drills to supply coolant Features: directly to the cutting edge increasing - 90º, 3 Flute, HSS. cutting efficiency and maximising bit life. Features: - 118º split point. Drill Range: - Drill diameters from 6mm up to 16mm. Product Code Contents 7405-30 30mm 90º 3 Flute 7405-40 40mm 90º 3 Flute 7405-55 55mm 90º 3 Flute ANNULAR CUTTER PINS, HSS ANNULAR CUTTER ADAPTORS AND EXTENSIONS 4 PIECE SETS The range includes a variety of Annular Cutters achieve burr-free finished accessories to suit Mag based holes without the need for pre-drilling or drilling machines including cutter step drilling. Faster and more accurate pins, drill chucks, arbors and than using standard HSS twist drills. extensions. Bordo HSS Annular Cutters feature a multi-fit shank which allows them to be used with most brands of mag based drill. Product Code Contents 7400-S1X25 14, 16, 18, 20, 22, 26mm Cutters and pin to suit 25mm cutters 7400-S1X50 14, 16, 18, 20, 22, 26mm Cutters and pin to suit 50mm cutters 101