TILT UP ACCESSORIES AND SYSTEMS EDGE LIFTING RAMSET FACE LIFT ANCHOR EDGE LIFT ANCHORS The SwiftLift™ JAWS™ Range: Reid offers 3 fully AS3850 compliant - Load range: 3t, 7t & 10t WLL lifting system alternatives to enable (Max ) in a ccordance the customer to choose the price with AS3850.1:2015 point and features to suit specific application - All JAWS™ anchors are Features and Benefits Hot Dip Galv. - Solid fixing into reo / mesh via - Cast into edge of the intergral bar clip precast panel Recess former used to form - Floating bar clip flaots with recess/void the mesh - Clutch fits into void a nd - Complies with AS3600 engages head of the anchor for concrete cover - Colour coded system – - Full plastic underside head of the anchor, protection to maximise recess former and clutch concrete cover and - Tension bar hole available withstand collisions in each colour coded range - Easy and fast void removal - New technology – teeth configuration - Increased safety with bolt in redundancy Suits panels thicknesses 125, 150, 175 and 200mm. JAWS CLUTCH All rated to 5t Maximum WLL Identification markings a re required for the SwiftLift™ JAWS™ clutch to comply REID FACE LIFT ANCHOR with AS3850-2003 The SwiftLift™ JAWS™ Facelifter with a unique robust wire clutch must be proof load chair to ensure performance under tested every 12 months in the harshest of conditions accordance with AS3850.1:2015 - High strength wire chair The SwiftLift™ JAWS™ clutch - Plastic dipped feet to comply has a FOS (factor of safety) with cover requirements, of no less than 5 in i.e. greater than accordance with 30mm cover AS3850.1:2015 - Compatible with SwiftLift 5 The important markings to tonne lifting eyes (5LERR) look for on a Reid SwiftLift™ JAWS™ clutch are - Low risk of displacement shown in the diagram from trafficking 1. The manufacturers name and logo - Can attach a plastic reo 2. Nominal size or class of anchors the clutch is designed to be clip for independent used with mesh movement Suitable for panel 3. A test tag showing that the clutch has been proof tested to the thicknesses 100, 125, required proof load for the particular clutch rating / class. 150, 175, and 200mm. 4. Manufacturing Batch Certification - a unique number that identifies 170mm and 120mm the specific batch of manufacture. panel thicknesses can also be accomodated on request. 90 www.constructionsupply.com.au