SIKATITE UNDERTILE® SIKATITE BE ® 521054 (1L ) / 521053 (4L) / 5210 52 (15L) 524582 (1L ) / 5245 84 (4L) / 524583 (15L) Water based synthetic rubber SikaTite BE is a water based waterpr oofing membrane for under- bitumen emulsion modified with tile, and protected applications. acrylic latex polymers. It can be - Excellent adhesion to most applied as a waterproof membrane, substrates sealant, protective coating or - Fast curing adhesive. It is designed for use underground, intern al andimmersed - Permanently flexible areas. - Approved for use with CTA tile - Water based, free of solvents adhesives and levelling systems and toxins. (polymer modified adhesive acceptable) - Excellent waterproofing properties - Anti-Microbial protection - Can be used in varying - Low VOC thicknesses - Easy clean-up with water and - Excellent bonding capabilities detergent prior to curing - Can be applied to damp surfaces - 1L, 4L, 15L - Can be mixed with sand/cement to improve adhesion, tensile strength, flexibility, sound dampening and to create falls - 1L, 4L, 15L SIKATITE MOISTURE SEAL 1K® SIKATITE ELASTOJOINT® 513297 (5L ) / 513298 (20L) Solvent free, very low emission, fast Sikaflex Tank N is a one part, moisture curing, ® primer / pre-treatment, for concrete elastic joint sealant which is used in areas for the substrates and screeds with high storage, filling and handling of water polluting moisture levels. liquids such as: - Resistant to moisture - Floor joints in petrol stations - Can be used on three day old concrete - Joints in handling areas, storage tanks and - Fast turnaround time of waterproofing containment bunds, movement- and connection and/or flooring works joints according to IVD data sheet no. 1. I. E. - Rapid cure time - In workshops and parking garages - EMICODE EC 1PLUS for very low - High chemical resistance emissions - High mechanical resistance - Ready to use - Movement capability of 25% (ISO 9047) - Easy to apply - Excellent application properties - Low consumption rate - Bandage – 120mm x 50m roll - 5L - Corners – 100mm x 100mm x box of 10 - 20L - Tap Sleeve – 120mm x 120mm x box of 10 501025 (50m bandage) 501023 (corner internal) 501022 (corner external) 501024 (tap sleeve) SIKATITE POROUS PRIMER® SIKATITE NON POROUS PRIMER® 525131 (1L ) / 525130 (5L) 525569 (1L ) / 525567 (5L) Water based, modified synthetic rubber Single component primer for application on based primer for porous substrates. both porous and non-porous substrates in - Rapid cure time preparation for use with SikaTite membrane - Reduces pin-holing systems. - Good adhesion to most building - Rapid cure time materials - Reduces pin-holing - Ready to use - Good adhesion to both porous - Easy to apply and non-porous substrates - Low consumption rate - Easy to apply - 1L - Low consumption rate - 5L - Low VOC - 1L - 5L 423