PLASTIC PACKING HALF SHIMS EASY-FORM™ EXPANSION JOINT Designed for the levelling and packing of objects with high load mass. Paperless Adhesive Back As it’s name says... these shims are half the size of the panel shims. Expansion Joint Ideally suited for, but not limited to, the precast panel industry. Each shim is colour coded to match its bigger brother for thickness identity Roll Length: 25m, Widths: and also contains ribbing on the faces for non-slippage. Also made from 50mm, 75mm, 100mm, high quality materials, proven and tested in its field. 125mm, 150mm, 200mm, Size is 75 x 100mm available 250mm & 300mm. in the following thicknesses: Thickness: 10mm. 1.0m, 2.0mm, 3.0mm, 5.0mm, 10.0mm, 15.0mm, 20.0mm - Meets Australian Standard AS 3850.1-2015 - Code Description 10055 1/2 Shim 1mm Brown 10056 1/2 Shim 2mm Blue SOF-FORM™ PLAIN & ADHESIVE 10057 1/2 Shim 3mm Green EXPANSION JOINT 10058 1/2 Shim 5mm Yellow Plain & Paper Back Adhesive Expansion Joint 10059 1/2 Shim 10mm Black Roll Length: 25m, Widths: 50mm, 75mm, 100mm, 125mm, 150mm, 10060 1/2 Shim 15mm Grey 200mm, 250mm & 300mm 10061 1/2 Shim 20mm White Thickness: 10mm & 20mm Stock, others made to order. PLASTIC PACKING SHIMS Designed for levelling and packing objects with a high load mass. Ideally suited to pre-cast concrete panels in the industrial, commercial and civil construction industries. Each shim is colour coded for easy selection, contains ribs for non slippage, is made with premium quality materials and are proven and tested out in the field. Available in the following thicknesses: 1.0mm, 2.0mm, 3.0mm, 5.0mm, 10.0mm, 15.0mm, 20.0mm PRO INDUSTRIAL CONCRETE SPRAYER - 13.2L Code Description OX-P040713 10062 1mm Shims Brown - Stainless steel heavy duty pump 10063 2mm Shims Blue - Stainless steel spray wand - Stainless steel tank 10064 3mm Shims Green - - Flexible heavy duty chemical 10065 5mm Shims Yellow resistant hose 10066 10mm Shims Black - Superior lock-on trigger assembly 10067 15mm Shims Grey - Ergonomic pump handle - Genuine OXseals equipped 10068 20mm Shims White - Meets Australian Standard AS 3850.1-2015 MESH CHAIR CONCRETE SEALER PRESSURE Panel chairs are used in the SPRAYER precast panel industry for holding SP35C mesh and some reo-bars at a required height prior to concreting. The four small points at the - Industrial heavy duty sprayer bottom of each chair reduces the - Viton seals unsightly exposure of plastic when the panel is erected. - Tank capacity: 9lt Code Description 10053 Mesh Chair 50mm x 60mm 10054 Mesh Chair 65mm X 75mm - ANTENNAE CAP NAILING PLATES Antennae cap protects the threads of a ferrule Screws into the ferrule and fastened to the while pouring concrete. Provides effcetive seal framework. Not only helps stabilise the insert through a tight push t coving the entire top of the when pouring, but also keeps concrete out of the ferrule. Locating pins indicate where Antennae thread when pouring. cap is, so it can be removed. Sizes available are: 12mm, 16mm, 20mm, 24mm Sizes available are: 12mm, 16mm, 20mm, 24mm 85