GLASS & TILE DRILL CORE BITS DIAMOND – BLUE CERAM For smooth drilling in ceramic tiles, glass, Feature diamond segment technology, brick, plastics, and fibreglass. enabling the bit to be used wet or dry. Note: Not suitable for toughened glass For drilling porcelain, monocottura, marble, glazed, terracotta, sandstone & standard ceramic tiles. - Cutting speed with water <3000 RPM *Blue Ceram drills oversize to allow drilling and fixing into material below the surface without chipping the tile. 4 facet diamond spear Check out point design the demo Shaves rather than cuts for improved precision and Point penetration Diamond segment tip for long life. Can be dressed for optimal performance D605 1000 D604 0800 Shank 10mm hex shank to suit Longer total length non-hammer action than standard tile bits portable power for deeper drilling drills Parallel Shank To suit non-hammer action portable Stronger power drills carbide tip with copper brazing has Spiral flute better heat Core Cavity Aids dust extraction and resistance and Large cavity for fast reduces heat build up for provides 7× material extraction 30% faster drilling† longer life † DiameterActual Hole Drilling Useful O/A Item # mm Diameter* Depth LengthLength Diameter O/A Length Item # Shank: 10mm Hex mm 6.0 6.3 8 22 55 D605 0600 3.0 80 D604 0300 7.0 7.4 8 22 55 D605 0700 4.0 80 D604 0400 8.0 8.4 10 20 55 D605 0800 5.0 80 D604 0500 10.0 10.6 15 30 65 D605 1000 6.0 80 D604 0600 12.0 12.6 15 28 65 D605 1200 6.5 100 D604 0650 15.0 15.6 15 40 70 D605 1500 8.0 100 D604 0800 20.0 20.6 15 40 70 D605 2000 10.0 100 D604 1000 25.0 25.6 15 40 70 D605 2500 12.0 100 D604 1200 Dressing St one D605 ST01 Water Dri ppe (5-15mm) D605 WAT2 r † Compared to standard glass and tile bits. Water Drip per (20-25mm) D605 WAT3 CERAMIC TILE DRILLS GLASS AND TILE DRILLS MULTI-FACET TUNGSTEN CARBIDE TUNGSTEN CARBIDE SPEAR POINT - Extreme performance multi-facet - Tungsten carbide spear point is tungsten carbide tip. extremely hard and features uniquely - Unique cutting edge geometry in sharpened edges for fast penetration conjunction with high temperature with reduced need for end thrust. brazing ensures reliable and accurate - Designed for drilling glass, tile and other drilling in multiple hole applications. hard, brittle materials. - Extended tool life when drilling hard - Cut clean round holes without chipping ceramic materials. or material breakage. - Not recommended for vitrified porcelain - Fractional diameters from 1/8" (3mm) - use Bordo Diamond Mist Drill. up to 1/2" (12.5mm). - Metric diameters from 3.0mm up to 10.0mm. - Also available in a 5 piece set. 110 www.constructionsupply.com.au