MASONRY DRILLS STRAIGHT SHANK SDS MULTI-FIT MASONRY DRILLS TUNGSTEN CARBIDE TIPPED TUNGSTEN CARBIDE TIPPED - Tungsten carbide tipped. - Vacuum brazed tungsten carbide tip. - Metric diameters from 3.0mm to 25.0mm. - Metric diameters from 5.0mm to 25.0mm. - Standard, single brick and double brick - Lengths from 110mm to 450mm. lengths. - Suits all rotary hammer drills fitted with - Straight shank for use in a hammer drill an SDS Plus or Ramset R3 chuck. with a standard chuck. - Strong chrome, nickel, molybdenum steel - High temperature brazing for long bit life. alloy construction. - For use in concrete, brick, block and stone. - Shot peened finish. SDS PLUS MASONRY DRILLS SDS MAX MASONRY DRILLS TUNGSTEN CARBIDE TIPPED TUNGSTEN CARBIDE TIPPED - Vacuum brazed tungsten carbide tip. - Vacuum brazed tungsten carbide tip. - Metric diameters from 4.0mm to 26.0mm. - Metric diameters from 12.0mm to 40.0mm. - Lengths from 110mm to 1,000mm. - Lengths from 370mm to 1,320mm. - Suits all rotary hammer drills fitted with - Suits all rotary hammer drills fitted with an SDS Plus chuck. an SDS Max chuck. - Strong chrome, nickel, molybdenum steel - Strong chrome, nickel, molybdenum steel alloy construction. alloy construction. - Shot peened finish. - Shot peened finish. X-BIT SDS PLUS MASONRY DRILLS TUNGSTEN CARBIDE TIPPED Bordo X-Bits drill faster and last longer than standard two edged rotary hammer bits. Hard stone and high MPA concrete quickly cause standard masonry bits to dull and break, but not the X -Bit. - Single piece 4 edge tungsten carbide head. - Extreme toughness and wear resistance. - Exceptionally low vibration. - Precision cutting facets create dimensionally accurate holes for improved anchor performance. - Patented chamfering on the tip ensures fracture resistance when drilling into concrete reinforcing. - Self-centering drill tip reduces bit wander. BIT - Four flute geometry ensures efficient dust removal. - Solid engineered heavy duty core the length of the drill prevents bending and breakage. - Metric diameters from 5.0mm to 25.0mm. - Lengths from 110mm to 450mm. DELTAGON SDS PLUS AND SDS MAX MASONRY DRILLS SOLID TUNGSTEN CARBIDE HEAD The Bordo range of Deltagon solid carbide head drill bits offer outstanding performance in a wide variety of masonry drilling applications. Deltagon bits offer specific advantages over standard SDS bits: - High durability and improved drilling speed. - Tungsten carbide head is permanently bonded to shank – not brazed. This results in extended bit life by eliminating bit failure due to excessive heat melting brazing material. - Drills through reinforcing mesh and reinforcing bar. - Minimised bit binding against reinforcing bar – increasing operator safety. Easily drills through all typical steel decking plate including Bondek®. - Eliminates rifling - drilling holes close to perfect roundness resulting in improved fastener performance by increasing pull out loads. - SDS Plus 4.0 to 26.0mm – Lengths 116mm to 470mm. - SDS Max 10.0 to 26.0mm – Lengths 305mm to 540mm. - Symmetrical multi-facet 3 cutter head or asymmetrical multi-facet 5 cutter head for reduced vibration. 128 www.constructionsupply.com.au