CORE BITS TCT SDS PLUS / SDS MAX Masonry Hammer Carbide Core Bits (Light Duty) - Alternating tooth design for increased durability and centering Drift Key Masonry Adaptor - Separate SDS adaptor with pilot drill available in multiple lengths for added flexibility and reach - Tungsten Carbide cutting edges for high wear resistance Crown Adaptor Crown Pilot Taper Crown Hammer Carbide Core Bits (Heavy Duty) Diameter Working Teeth Shank Item # Diameter Working Teeth Shank Item # mm Length mm Length Masonry Hammer Carbide Core Bits (Light Duty) Taper Crown Hammer Carbide Core Bits (Heavy Duty) 25.0 60 5 SDS Plus 015937 30.0 90 5 SDS Max 016088 30.0 60 5 SDS Plus 015944 35.0 90 5 SDS Max 016095 35.0 60 5 SDS Plus 015951 40.0 90 6 SDS Max 012745 40.0 60 6 SDS Plus 015968 45.0 90 6 SDS Max 016101 45.0 60 6 SDS Plus 015975 50.0 90 7 SDS Max 016118 50.0 60 7 SDS Plus 015982 60.0 90 8 SDS Max 012752 60.0 60 8 SDS Plus 015999 66.0 90 8 SDS Max 012769 66.0 60 8 SDS Plus 016002 70.0 90 8 SDS Max 016125 68.0 60 8 SDS Plus 024250 80.0 90 9 SDS Max 016132 70.0 60 8 SDS Plus 016019 90.0 90 10 SDS Max 016149 80.0 60 9 SDS Plus 016026 100.0 90 11 SDS Max 012776 90.0 60 10 SDS Plus 016033 110.0 90 11 SDS Max 016156 Masonry Adaptor ( Inc luding Pilot Drill) 125.0 90 12 SDS Max 016163 90 SDS Plus 063730 Crown Adaptor (E xcl uding Pilot Drill) 150 SDS Plus 016057 220 SDS Max 016194 200 SDS Plus 016064 420 SDS Max 012790 300 SDS Plus 016071 900 SDS Max 063969 135 Hexagonal 063747 Crown Pilot Dril l Taper centring drill bit 11x120 012806 Drift Key 012813 SAVAGE DIAMOND CORE DRILLS SDS MASONRY CORE BITS AND HOLE SAWS - Diamond core drills only drill out a portion - Premium vacuum brazed of the resulting hole so they drill much tungsten carbide. faster then conventional blunt nose drills. - SDS Multi-fit mandrel / arbor. Core drills can be used on most non- - Extensions available from 100mm ferrous hard materials such as glass, up to 320mm long. ceramic, porcelain, fibreglass, slate, - Metric diameters from 30mm marble, granite and other natural and up to 125mm. manufactured stone materials. - The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used. - Using diamond core drills in hard materials is not difficult, however drilling the hole takes time. You should consider that they aren’t “drilling” a hole – they are “grinding” a hole. - Metric diameters from 4.0mm to 128.0mm. 160 www.constructionsupply.com.au