SIKAFLOOR LEVEL PRO ® SIKAFLOOR LEVEL GP ® 475575 529468 High performance, self-levelling underlayment for Construction grade, easy to use leveller for interior. interior and protected exterior applications. applications. - 20Kg bag - 20Kg bag THICKNESS: THICKNESS: - Feather edge to 50mm - 2mm to 35mm - Bulking: 35mm-75mm with Sikadur 505 - Bulking: 20mm-50mm with Sikadur 505 DRYING TIME: DRYING TIME : - Walkable in approximately 12 hrs+ - Walkable from 4 hours+ SUBSTRATES: SUBSTRATES: - Concrete –New and Old - Concrete – New and Old - Existing Tile and Stone - Existing Tile and Stone - Timber (Contact Sika Technical Services) - Timber (Contact Sika Technical Services) FLOOR COVERIN GS: FLOOR C OVERINGS: - Vinyl / Linoleum: From 24 hours+ - Vinyl / Linoleum - Timber: From 24 hours+ - Timber - Tile: 18 hours to 24 hours+ - Tile - Stone: 18 hours to 24 hours+ - Stone SIKAFLOOR LEVEL 30 ® SIKAFLOOR LEVEL PRO PRIMER® 473525 480874 (5L) / 484510 (20L) High performance, wear surface Sikafloor Level Pro Primer is a latex topping for interior or exterior use. based liquid, which can be used for - 20Kg bag priming a wide range of substrates THICKNESS: prior to the use of Sikafloor self- levelling compounds. Sikafloor Level - 4mm to 30mm Pro Primer will eliminate dust and DRYING TIME: reduce porosit y of fi brous cement - Walkable from 3 to 4 hrs+ sheeting, cement render and porous concrete substrates. SUBS TRATES: - Suitable for internal and external use - Concrete - Reduces porosity of substrate FLOOR COVERINGS: - Eliminates dust - Epoxy Coatings from 12 hrs+ - Easy application subject to bed thickness and site - Ready to use no mixing required conditions - Dries in as little as 30 Minutes (Temp Dependant) - 5L - 20L SIKAFLOOR 01 PRIMER ® SIKATITE MOISTURE SEAL 1K 513124 (5kg) 513297 (5L) / 513298 (20L) Sikafloor 01 Primer is a universal single Single component moisture mitigation component dilutable primer for use prior primer for Sikafloor levelling and Sikatite to application of Sikafloor Level range waterproofing sy stems. Water based, very underlayments. Porous and non porous low emission, fast primer / pretreatment, for substrates for interior applications. concrete substrates and screeds with high - For interior use on floors moisture levels. - Solvent-free according to TRGS 610 - Seals moisture to 90% RH - two coats - Low consumption / high coverage - Seals moisture to 93% RH - three coats - Short waiting time - Re coat time – 15 minutes between 1 & 2 coats - Can be applied to almost all substrates* - 45 minutes between 2 & 3 - Can be sprayed - Can be used on three day old concrete* - Porous substrates – diluted 1:3 with - Fast turnaround time of waterproofing clean water and/or flooring works - Ready for use concentrate for - Rapid cure time non porous substrates - 5kg - EMICODE EC 1PLUS for very low emissions - Ready to use - Easy to apply - Low consumption rate - 5L & 20L 184 www.constructionsupply.com.au