MYTON 2.5” (58MM) DISC GRINDER COMPACT MULTI-SANDER MLG-25 CMX-20 - Deadman safety lever - Newly des igned Green disc allows - 3 multi-heads for variety of uses grinding of Iron and Stainless Steel - Variable speed - Air Consumption: 14.8cfm - ¼” Inlet - Speed: 19,000rpm - Spe ed : 13,000rpm - Inlet thread size: 1/4” - Air Consumption : 5.3 cfm - Weight: 0.6kg - Weight : 0.53kg MYTON 4” (100MM) DISC GRINDER MYTON 5” (125MM) DISC GRINDER MLG-40 MLG-50 - Deadman safety lever - Deadman safety lever - Long life motor vanes reduce tool downtime - Air Consumption: 24.0cfm - Lock Spindle for quick disc change - Speed: 13,000rpm - Air Consumption: 14.8cfm - Inlet thread size: 3/8” - Speed: 19,000rpm - Threaded Spindle: M10 x 1.5mm - Inlet thread size: 3/8” - Weight: 1.4kg - Weight: 0.6kg MYTON 7” (180MM) DISC GRINDER AUTO CHISEL MLG-70 A-300 - Deadman safety lever - Durable and powerful - Advanced Governor and Disc Lock - Enable hammering work in narrow spaces system - Chisel Chuck / Shank Size: 10mm sq. - Air Consumption: 24.7cfm - Air Consumption: 10.5cfm - Speed: 7,600rpm - Stroke: 2,600rpm - Inlet thread size: 3/8” - Inlet thread size: 1/4” - Weight: 2.45kg - Weight: 1.7kg Chisel not included , for illustration purposes only Threaded Adaptors Available AIR CHIPPING HAMMER SUPER KELEN SCALER CH-24 S-250 - Chisel lock retains chisel securely - 250mm handle for those hard to reach applications - High strength piston allows trouble-free operation - 38mm Bent Scraper as standard, wide - Chisel Chuck / Shank Size: 12.7mm sq. range of chisels available - Air Consumption: 7.0cfm - Chisel Chuck / Shank Size: 12.7mm sq. - Stroke: 4,000rpm - Air Consumption: 9.5cfm - Inlet thread size: 3/8” - Stroke: 2,500rpm - Weight: 1.7kg - Inlet thread size: 3/8” - Weight: 4.1kg S-1000 extended 1m Model available MYTON DISC SANDER PALM ORBITAL 150MM (6”) SANDER MLS-20 APS150 - 1”, 1-1/2” and 2” pads - Extremely low vibration - Locking throttle lever - Adjustable speed - ¼” Inlet - Speed: 10,000rpm - Bore size: 6mm Collet - Orbit Diameter: 5mm - Air Consumption : 14.8 cfm - Air Consumption: 16.0cfm - Speed : 19,000 rpm - Inlet size: 1/4” - Weight : 0.55kg - Weight: 0.72kg HANDY 70MM PNEUMATIC SANDER RECIPROCATING SUPER SAW FS50A SSW-110 - Small, lightweight and compact to permit - Adoption of piston rings minimized power loss working easily in corners and other tight spots and improved cutting efficiency - Turbine motor minimizes vibration - Rated Air Pressure: 6kgf/cm² - Speed: 15,000rpm - Air Consumption: 10.24cfm - Orbit Diameter: 1.2mm - Stroke Speed: 7,000min -1 - Air Consumption: 5.0cfm - Cutting Capacity: 3mm (Mild steel) - Inlet size: 1/4” - Stroke: 11mm - Weight: 0.5kg - Weight: 0.62kg 26 www.constructionsupply.com.au