AL Series Large Thin Flange / Splined / Open end Highest resistance to vibration and spin-out of all round bodied inserts. Flange with near flush finish. Very wide grip range. Low torque required to install. Material: Low carbon steel Finish: Zinc clear Cr3 Thread Size Part Code Grip Hole A B C D Push Out Pull Out Ultimate Torque mm mm mm mm mm mm Kgf Kgf Kgf.cm IN-YLF04-2.0 0.5-2.0 6.8 6.7 11.5 9.9 0.8 300 700 60 M4 IN-YLF04-3.3 2.0-3.3 6.8 6.7 12.7 9.9 0.8 200 700 60 M5 IN-YLF05-3.3 0.5-3.3 7.6 7.5 12.9 10.5 0.8 300 800 100 IN-YLF05-5.7 3.3-5.7 7.6 7.5 15.5 10.5 0.8 300 800 100 M6 IN-YLF06-4.2 0.7-4.2 10.0 9.9 15.5 12.7 0.8 400 1300 200 IN-YLF06-6.6 4.2-6.6 10.0 9.9 18.0 12.7 0.8 400 1100 200 M8 IN-YLF08-3.8 0.7-3.8 13.5 13.5 18.4 17.4 0.9 700 2200 300 IN-YLF08-7.9 3.8-7.9 13.5 13.5 21.4 17.4 0.9 700 2200 300 M10 IN-YLF10-3.8 0.7-3.8 13.5 13.5 18.4 17.4 0.9 700 2200 600 IN-YLF10-7.9 3.8-7.9 13.5 13.5 21.2 17.4 0.9 700 2300 600 IN-YLF12-5.1 1.6-5.1 17.5 17.4 30.4 22.0 1.2 – – – M12 IN-YLF12-8.9 5.1-8.9 17.5 17.4 34.2 22.0 1.2 – – – IN-YLF12-12.7 8.9-12.7 17.5 17.4 38.0 22.0 1.2 – – – Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. 10 www.rivetlab.com LEETS