IN9408S Series Large Flange / Splined / Metric Optimal for high push-out applications. Dimensioned for installation into hard metric holes. Tapered entry. Splined body improves torque-to-turn resistance. Material: Stainless Steel 304 / A2 Thread Size Part Code Grip Hole A B C D Push Out Pull Out Ultimate Torque mm mm mm mm mm mm Kgf Kgf Kgf.cm M3 IN9408S-0320 0.3-2.0 5.0 4.9 9.8 8.0 0.8 300 500 30 IN9408S-0425 0.3-2.5 6.0 5.9 12.0 9.0 1.0 400 800 70 M4 IN9408S-0440 2.5-4.0 6.0 5.9 13.5 9.0 1.0 400 850 70 M5 IN9408S-0530 0.3-3.0 7.0 6.9 13.0 10.0 1.0 500 1500 100 IN9408S-0545 3.0-4.5 7.0 6.9 14.5 10.0 1.0 500 1600 100 M6 IN9408S-0630 0.5-3.0 9.0 8.9 15.5 12.0 1.5 850 2100 150 IN9408S-0650 3.0-5.0 9.0 8.9 17.5 12.0 1.5 850 2300 200 M8 IN9408S-0830 0.5-3.0 11.0 10.9 17.5 15.0 1.5 1000 3500 500 IN9408S-0855 3.0-5.5 11.0 10.9 20.0 15.0 1.5 1000 4100 500 IN9408S-1035 1.0-3.5 13.0 12.9 21.0 17.0 2.0 1300 5200 – M10 IN9408S-1060 3.5-6.0 13.0 12.9 23.5 17.0 2.0 1300 5000 – M12 IN9408S-1240 1.0-4.0 16.0 15.9 25.2 22.0 2.0 2000 6200 – Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. 26 www.rivetlab.com LEETS SSELNIATS