PANELOK Panelok is a highly customised two-piece bolt-&-nut type fastener. When installed, a high ten- sile, low profile splined bolt with an undercut head, nitrile seal and Scotch-grip patch on the thread matches neatly with a Torx drive T-nut. Externally tamperproof, the assembly is optimal for metal/wood applications where a Low-Profile finish is desirable on both-sides. Door hard- ware and frame/bulkhead attachments to GRP are favoured applications. Material:1022 Steel Finish:Zinc Plate Bolt Code Hole Size D1 D2 H W L L (tap-in fit) (thread form) mm mm mm mm mm mm in APLB-1014 10.0 10.5 5/16” UNC 22 5 22.2 7/8” APLB-1016 10.0 10.5 5/16” UNC 22 5 25.4 1” APLB-1020 10.0 10.5 5/16” UNC 22 5 31.8 1-1/4” Nut Code H W L D Drive Bit Bolts are supplied with nitrile weather seal mm mm mm mm under the head. APLN-1004 25 5 6 10 Torx T55 APLN-1006 25 5 10 10 Torx T55 APLN-1008 25 5 13 10 Torx T55 APLN-1010 25 5 16 10 Torx T55 APLN-1016 25 5 25 10 Torx T55 GRIP DATA - using various bolt/nut combinations Shear strength: 14KN Tensile strength: 20KN Bolt Code Nut Code Grip Range (mm) Suggested torque assembly: 17.20Nm APLB-1014 APLN-1006 18.0 - 21.0 APLB-1014 APLN-1008 21.0 - 24.9 APLB-1014 APLN-1010 22.5 - 28.1 APLB-1016 APLN-1008 24.4 - 28.1 APLB-1016 APLN-1010 25.4 - 31.3 APLB-1020 APLN-1008 30.8 - 34.5 APLB-1020 APLN-1010 30.8 - 37.7 APLB-1020 APLN-1016 35.3 - 47.6 All dimensions are nominal. Detailed dimensions are available on request. Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. www.rivetlab.com 53 KOLENAP