IN9498 Series Full Hex Body / Large Flange / Open End Large flange head, used in conjunction with a hexagon hole to give maximum resistance to applied torque or unscrewing torque. Material:Low carbon steel Finish: Zinc clear Cr3 Thread Size Part Code Grip Hex Hole A B C D Push Out Pull Out Ultimate A/F Torque mm mm mm mm mm mm Kgf Kgf Kgf.cm M4 IN9498-0425 0.5-2.5 6.1 6.0 11.2 9.0 0.8 200 700 50 IN9498-0440 2.5-4.0 6.1 6.0 12.7 9.0 0.8 200 700 40 M5 IN9498-0530 0.5-3.0 7.1 7.0 13.0 10.0 1.0 400 1100 80 IN9498-0545 3.0-4.5 7.1 7.0 14.5 10.0 1.0 400 1100 80 M6 IN9498-0630 0.5-3.0 9.1 9.0 16.0 13.0 1.5 600 1500 100 IN9498-0650 3.0-5.0 9.1 9.0 18.0 13.0 1.5 500 1600 100 M8 IN9498-0830 0.5-3.0 11.1 11.0 18.0 16.0 1.5 700 2400 200 IN9498-0855 3.0-5.5 11.1 11.0 20.5 16.0 1.5 600 2100 300 M10 IN9498-1045 1.0-4.5 13.1 13.0 24.0 19.0 2.0 1000 3500 500 IN9498-1060 4.0-6.0 13.1 13.0 25.5 19.0 2.0 1100 3400 500 M12 IN9498-1250 1.5-5.0 16.1 16.0 27.0 23.0 2.0 1400 5000 – Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. www.rivetlab.com 17 LEETS