IN39006S Series Low Profile / Splined / Open End / METRIC Low profile head. Optimal for low load bearing applications in thin sheet. Dimensioned for installation into hard metric holes. Splined body improves torque-to-turn resistance. Material:Stainless Steel 304 / A2 Thread Size Part Code Grip Hole A B C D Push Out Pull Out Ultimate Torque mm mm mm mm mm mm Kgf Kgf Kgf.cm M3 IN39006S-0320 0.5-2.0 5.0 4.9 9.0 6.0 0.5 200 500 30 IN39006S-0425 0.5-2.5 6.0 5.9 11.0 7.0 0.5 250 800 50 M4 IN39006S-0440 2.5-4.0 6.0 5.9 12.5 7.0 0.5 300 850 50 M5 IN39006S-0530 0.5-3.0 7.0 6.9 12.0 8.0 0.5 300 1500 100 IN39006S-0545 3.0-4.5 7.0 6.9 13.5 8.0 0.5 300 1600 100 M6 IN39006S-0630 0.5-3.0 9.0 8.9 14.0 10.0 0.5 400 2100 200 IN39006S-0650 3.0-5.0 9.0 8.9 16.0 10.0 0.5 400 2300 200 M8 IN39006S-0830 0.5-3.0 11.0 10.9 16.0 12.0 0.5 450 3000 450 IN39006S-0855 3.0-5.5 11.0 10.9 18.5 12.0 0.5 450 3800 450 IN39006S-1035 1.0-3.5 13.0 12.9 19.0 14.2 0.8 650 5100 – M10 IN39006S-1060 3.5-6.0 13.0 12.9 21.5 14.2 0.8 650 5000 – M12 IN39006S-1242* 1.0-4.2 16.0 15.9 22.5 17.4 0.7 – – – Non splined body * Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. www.rivetlab.com 23 LEETS SSELNIATS