IN9408 Series Large Flange / Splined / METRIC Optimal for high push-out applications. Dimensioned for installation into hard metric holes. Tapered entry. Splined body improves torque-to-turn resistance. Material:Low carbon steel Finish: Zinc clear Cr3 Thread Size Part Code Grip Hole A B C D Push Out Pull Out Ultimate Torque mm mm mm mm mm mm Kgf Kgf Kgf.cm M3 IN9408-0320 0.5-2.0 5.0 4.95 10.5 8.0 0.7 100 500 20 IN9408-0425 0.5-2.5 6.0 5.95 11.0 9.0 0.8 200 600 30 M4 IN9408-0440 2.5-4.0 6.0 5.95 9.0 0.8 200 600 30 12.5 M5 IN9408-0530 0.7-3.0 7.0 6.95 13.0 10.0 1.0 300 800 80 IN9408-0545 3.0-4.5 7.0 6.95 14.5 10.0 1.0 300 800 80 M6 IN9408-0630 0.8-3.0 9.0 8.95 16.5 13.0 1.5 400 1400 100 IN9408-0650 3.0-5.0 9.0 8.95 18.5 13.0 1.5 400 1400 100 M8 IN9408-0830 1.0-3.0 11.0 10.95 17.5 16.0 1.5 500 1450 200 IN9408-0855 3.0-5.5 11.0 10.95 21.0 16.0 1.5 500 1450 200 M10 IN9408-1045 1.0-4.5 13.0 12.95 24.0 19.0 2.0 900 2900 300 IN9408-1060 4.5-6.0 13.0 12.95 25.5 19.0 2.0 900 2900 300 M12 IN9408-1240 1.0-4.0 16.0 15.95 25.2 21.7 2.0 1100 3100 700 IN9408-1270* 4.0-7.0 16.0 15.95 30.0 21.7 2.0 1100 3100 700 M16 IN9408-1650* 1.0-5.0 21.0 20.95 32.8 26.0 2.5 – – – Non splined * Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. 8 www.rivetlab.com LEETS