Plusnut Series Steel / Flanged Head / Pre Bulbed The Plusnut has been designed to provide the ultimate pull out strength in thin metals and plastic. Its slotted body splits into four legs providing a wide load-bearing surface on the back- side of the parent material. The Plusnut also features the widest grip range of any blind threaded nut and is pre-bulbed for easier installation. Material:Low carbon steel Finish: Zinc clear Cr3 Thread Part Code Grip Hole A B C D Push Out Pull Out Ultimate Size Torque mm mm mm mm mm mm Kgf Kgf Kgf.cm INPNS-0504* 0.5-4.5 7.5 7.5 22.0 12.7 1.0 – – – M5 INPNS-0508* 4.5-8.1 7.5 7.5 24.8 12.7 1.0 – – – M6 INPNS-0607-P 0.5-7.1 10.0 8.8 26.9 15.9 1.5 – 1900 122 INPNS-0613-P 7.1-12.7 10.0 8.8 32.8 15.9 1.5 – 1900 122 M8 INPNS-0807-P 0.5-7.1 12.7 11.1 30.5 19.0 1.6 – 2500 214 INPNS-0813-P 7.1-12.7 12.7 11.1 36.5 19.0 1.6 – 2500 214 M10 INPNS-1007-P 0.5-7.1 15.1 15.0 33.1 22.3 2.2 – 3000 306 Not Pre-bulbed * Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. www.rivetlab.com 21 LEETS