Gesipa Taurus 1® ® Setting Capacity 2.4 (3/32”) 3.2 (1/8”) 4.0 (5/32”)4.8 (3/16”) 6.4 (1/4”) 7.8 (5/16”) Air Riveting Tool for Rivets up to 4.0mm Ø ALUMINIUM Gesipa Taurus 1 is a light-weight, high performance air hydraulic riveting® ® tool. It features a patented jaw gripping mechanism. The jaws are pressed STEEL onto the mandrel by using compressed air instead of the traditional spring STAINLESS force - no more worn springs to replace. As a result, the tool is more reli- able and has a longer service life. When the trigger is depressed, high pressure air clamps the jaws to the mandrels, the full stroke is utilised to set a rivet, and the clamping force is ten times higher than the spring method. The tool uses the same air to set the rivets and extract theman- drel. This tool provides considerable savings on compressed air usage. Patented jaw mechanism Spring balance attachment ensures full stroke of tool for fatigue free operation available to set a rivet Mandrel collecting system with swivelling air deflector Unique air consumption system sets the rivets and extracts the mandrel using Rubberised, moulded grip the same air- significant avoids slipping cost savings on air usage Readily accessible nose- pieces Made in Germany Specifications Package Accessories Product Code: GT-TAURUS1 Nosepieces: 17/18, 17/24 and 17/27 Weight: 1.3 kg Maintenance wrench: SW12/14, SW 14/17 Length: 278 mm One hydraulic oil bottle 100ml Operating Air Pressure: 5 - 7 bar One oil refill container Pulling Force: 4,200 N Operating instructions with spare parts list Stroke: 15 mm * Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. 62 www.rivetlab.com