Rubber Nut Series Nut material-Brass Body-themoplastic EPDM Rubber Nuts are optimal for applications where isolation to reduce vibration and noise transmission is desirable. Installed from one side, without special tools. Absorbs vibration due to high elasticity. Suitable for thin as well as thick plates, pipes, glass and plywood. Watertight seal. No electrical conductivity. Can be removed. Material:Rubber / Brass Nut Thread Size Part Code Grip Hole Flange Flange Length Torque Hardness (diamete)r (height) (overall) mm mm mm mm mm Nm Durometer IN-RNM3100* 0.4 - 4.0 8.0 11.0 1.40 12.60 0.25 - 0.5 60 M3 IN-RNM3250 9.5 - 13.0 6.2 14.0 0.90 24.90 0.25 - 0.5 70 IN-RNM4100 0.4 - 4.0 8.0 11.0 1.40 12.60 0.25 - 0.4 70 M4 IN-RNM4140 0.4 - 4.4 8.0 19.1 1.50 14.20 0.25 - 0.4 70 IN-RNM4240 8.5 - 15.0 8.0 11.0 1.20 24.00 0.25 - 0.4 70 IN-RNM5150 0.4 - 4.9 9.7 12.7 0.90 14.10 0.34 - 0.5 60 M5 IN-RNM5190 0.8 - 5.8 9.7 19.0 4.70 20.95 0.4 - 0.7 60 IN-RNM5200 4.0 - 10.0 9.7 14.0 0.90 21.50 0.3 - 0.9 60 IN-RNM5250 7.9 - 16.0 9.7 14.0 1.30 26.50 0.3 - 0.7 60 IN-RNM6150* 0.4 - 2.8 12.8 16.0 1.30 16.00 0.6 - 1.0 60 IN-RNM6200 0.8 - 4.7 12.8 19.0 4.75 21.10 0.8 - 1.0 70 M6 IN-RNM6250 6.4 - 11.5 12.8 16.3 2.00 26.70 0.8 - 1.0 70 IN-RNM6350 11.5 - 23.0 13.1 16.0 1.30 35.00 0.8 - 1.0 60 IN-RNM8200 0.4 - 4.0 16.0 21.5 3.20 18.30 1.0 - 1.5 60 M8 IN-RNM8300 2.0 - 18.0 18.1 20.5 2.00 30.00 1.0 - 1.6 60 IN-RNM8500 15.0 - 39.0 18.1 20.0 1.60 50.00 3.0 - 4.0 60 M10 IN-RNM1055 19.0 - 40.0 20.1 22.5 1.30 55.00 4.4 - 5.4 60 M12 IN-RNM1275 38.0 - 64.0 24.1 27.0 1.30 78.00 5.9 - 6.9 60 Check for availability * Body material is susceptible to damage from oil and solvents. Temperature range applicable -30 thru +80 celcius. Hardness (+/-5) Shore -60 Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. 34 www.rivetlab.com STUN REBBUR