IN38 Series Low Profile / Closed End Low profile head. Optimal for low load bearing applications in thin sheet. Dimensioned for installation into hard metric holes. Splined body improves torque-to-turn resistance. For applications where sealing to prevent the ingress of solids or moisture is desirable. Material:Low carbon steel Finish: Zinc clear Cr3 Thread Size Part Code Grip Hole A B C D Push Out Pull Out Ultimate Torque mm mm mm mm mm mm Kgf Kgf Kgf.cm M4 IN38-M4 0.5-2.5 6.0 5.9 15.0 6.8 0.5 150 550 40 M5 IN38-M5 0.5-2.5 7.0 6.9 18.0 7.9 0.5 200 650 80 M6 IN38-M6 0.5-3.0 9.0 8.9 21.5 10.0 0.5 250 1300 150 M8 IN38-M8 1.0-3.2 11.0 10.9 22.5 12.0 0.5 300 1400 300 Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. www.rivetlab.com 13 LEETS