IN9410 Series Large Flange / Closed End Optimal for high push-out applications. Dimensioned for installation into hard metric holes. Tapered entry. For applications where sealing to prevent the ingress of solids or moisture is desirable. Material:Low carbon steel Finish: Zinc clear Cr3 Thread Size Part Code Grip Hole A B C D Push Out Pull Out Ultimate Torque mm mm mm mm mm mm Kgf Kgf Kgf.cm M4 IN9410-0425 0.5-2.5 6.0 5.9 15.7 9.0 0.8 200 550 40 M5 IN9410-0525 0.5-2.5 7.0 6.9 18.0 10.0 1.0 250 650 80 M6 IN9410-0630 0.7-3.0 9.0 8.9 21.5 13.0 1.5 400 1300 150 M8 IN9410-0830 0.7-3.0 11.0 10.9 24.5 16.0 1.5 500 1400 300 M10 IN9410-1035 1.0-3.5 12.0 11.9 29.0 16.0 1.7 – – – Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. www.rivetlab.com 19 LEETS