Aluminium Multigrip Rivets Wide grip range (Reduces inventory). Outstanding hole fill in drilled or reworked holes. Positive mandrel retention. Weatherproof to 0.25 bar. Neat appearance on rear side. Material: Body: Aluminium alloy (2.5% Mg) to AA 5052 DIN 1725 AI Mg2.5 Mandrel: Low carbon steel SAE 1015/1022 DIN 1654 Finish: Body: Natural Mandrel: Zinc Coated Diameter Part Code Grip Hole A B C D E Shear Tensile mm mm mm mm mm mm mm mm KN KN 120Countersunk Head - Aluminium / Steelo 3.2 AV04-0412 2.4-6.4 3.3 3.2 9.7 5.35 0.85 1.81 0.7 0.9 1/8” AV04-0414 4.0-7.9 3.3 3.2 11.1 5.35 0.85 1.81 0.7 0.9 AV04-0416 4.0-9.5 3.3 3.2 12.7 5.35 0.85 1.81 0.7 0.9 4.0 AV04-0514 2.8-7.9 4.1 4.0 11.3 6.3 0.90 2.25 1.0 1.3 5/32” AV04-0516 4.3-9.5 4.1 4.0 12.7 6.3 0.90 2.25 1.0 1.3 4.8 AV04-0615 3.2-7.9 4.9 4.8 12.1 8.7 1.45 2.80 1.6 2.3 3/16” AV04-0621 6.4-12.7 4.9 4.8 16.9 8.7 1.45 2.80 1.6 2.3 Large Flange - Aluminium / Steel 3.2 AV41-0412 1.2-6.4 3.3 3.2 9.5 9.5 1.20 1.81 0.7 1.0 1/8” AV41-0416 5.5-9.5 3.3 3.2 12.7 9.5 1.20 1.81 0.7 1.0 4.0 AV41-0514 3.2-7.9 4.1 4.0 11.1 12.0 1.50 2.25 1.1 1.7 5/32” AV41-0521 6.4-12.7 4.1 4.0 16.9 12.0 1.50 2.25 1.1 1.7 4.8 AV41-0613 1.6-6.4 4.9 4.8 10.3 15.85 1.75 2.80 1.6 2.4 3/16” AV41-0621 6.4-12.7 4.9 4.8 16.9 15.85 1.75 2.80 1.6 2.4 AV41-0631 12.7-19.8 4.9 4.8 24.8 15.85 1.75 2.80 1.6 2.4 Truss Head - Aluminium / Steel AV61-0410 0.8-4.8 3.3 3.2 8.0 5.2 1.0 1.81 0.7 1.0 3.2 AV61-0414 4.0-7.9 3.3 3.2 9.5 5.2 1.0 1.81 0.7 1.0 1/8” AV61-0416 5.5-9.5 3.3 3.2 12.7 5.2 1.0 1.81 0.7 1.0 4.0 AV61-0512 1.2-6.4 4.1 4.0 9.5 6.2 1.35 2.25 1.1 1.7 5/32” AV61-0516 4.0-9.5 4.1 4.0 12.7 6.2 1.35 2.25 1.1 1.7 AV61-0613 1.6-6.4 4.9 4.8 10.3 8.6 1.65 2.80 1.6 2.4 4.8 AV61-0619 4.8-11.1 4.9 4.8 15.1 8.6 1.65 2.80 1.6 2.4 3/16” AV61-0621 6.4-12.7 4.9 4.8 16.9 8.6 1.65 2.80 1.6 2.4 AV61-0631 12.7-19.8 4.9 4.8 24.8 8.6 1.65 2.80 1.6 2.4 Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. www.rivetlab.com 45 STEVIR PIRGITLUM