IN39006 Series Low Profile / Open End / METRIC Low profile head. Optimal for low load bearing applications in thin sheet. Dimensioned for installation into hard metric holes. Splined body improves torque-to-turn resistance. Material:Low carbon steel Finish: Zinc clear Cr3 Thread Size Part Code Grip Hole A B C D Push Out Pull Out Ultimate Torque mm mm mm mm mm mm Kgf Kgf Kgf.cm M3 IN39006-0315 0.5-1.5 5.0 4.95 9.00 5.7 0.4 90 300 20 IN39006-0425 0.5-2.5 6.0 5.95 11.3 6.5 0.5 100 600 30 M4 IN39006-0440 2.5-4.0 6.0 5.95 12.0 6.5 0.5 100 400 30 M5 IN39006-0530 0.5-3.0 7.0 6.95 12.6 7.6 0.5 150 900 90 IN39006-0540 2.5-4.0 7.0 6.95 14.0 7.6 0.5 100 600 60 M6 IN39006-0630 0.5-3.0 9.0 8.95 15.3 10.0 0.5 200 1400 100 IN39006-0650 3.0-5.0 9.0 8.95 17.0 10.0 0.5 150 1100 100 M8 IN39006-0830 0.5-3.0 11.0 10.95 17.3 12.0 0.5 300 1500 200 IN39006-0855 3.0-5.5 11.0 10.95 18.5 12.0 0.5 200 1300 200 M10 IN39006-1040 1.0-4.0 13.0 12.95 20.5 14.0 0.6 300 2500 300 IN39006-1060 4.0-6.0 13.0 12.95 23.5 14.0 0.6 300 2300 500 M12 IN39006-1240* 1.0-4.0 16.0 15.90 24.0 17.2 0.6 400 3500 — IN39006-1260* 4.0-6.0 16.0 15.90 27.0 17.2 0.6 500 3300 — Check for availability before ordering * Last four digits of part number = thread diameter x maximum sheet thickness. Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. www.rivetlab.com 9 LEETS