IN39101 Series Full Hex Body / Low Profile / Open End / Metric AF Low profile head, full hex body, used in conjunction with a metric hexagon hole to give maximum resistance to applied torque or unscrewing torque. Material:Low carbon steel Finish: Zinc clear Cr3 Thread Size Part Code Grip Hex Hole A B C D Push Out Pull Out Ultimate A/F Torque mm mm mm mm mm mm Kgf Kgf Kgf.cm M4 IN39101-0425 0.5-2.5 6.1 6.0 10.0 7.0 0.5 100 600 30 IN39101-0440 2.0-4.0 6.1 6.0 12.2 7.0 0.5 100 700 40 M5 IN39101-0530 0.5-3.0 7.1 7.0 12.0 8.0 0.6 150 900 60 IN39101-0545 2.0-4.5 7.1 7.0 14.8 8.0 0.6 200 1100 80 M6 IN39101-0630 0.6-3.0 9.1 9.0 15.0 10.0 0.6 300 1400 100 IN39101-0655 3.0-5.5 9.1 9.0 18.0 10.0 0.6 300 1400 100 M8 IN39101-0835 0.7-3.5 11.1 11.0 17.5 12.0 0.5 350 2200 200 IN39101-0855 3.0-5.5 11.1 11.0 19.0 12.0 0.5 350 2100 300 M10 IN39101-1045 1.0-4.5 13.1 13.0 23.0 14.5 1.0 500 3000 500 IN39101-1060 3.0-6.0 13.1 13.0 25.0 14.5 1.0 500 3000 400 M12 IN39101-1240 1.0-4.0 16.1 16.0 25.0 18.0 1.0 700 5200 – IN39101-1265 3.5-6.5 16.1 16.0 28.0 18.0 1.0 800 5100 – Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. 14 www.rivetlab.com LEETS