Rivlok Rivets® Rivlok Series rivets are blind structural rivets with a mechanically locked mandrel. They are® optimal for structual or demanding applications. Installed easily from one side, the rivet features impressive installed values, excellent hole fill, generous grip range, pressure tight seal and flush breaking mandrel regardless of material thickness. Material: Body: Low Carbon Steel Mandrel: Medium Carbon Steel Finish:Body: Zinc Plated Cr VI free Mandrel: Zinc Plated Cr VI free Dome Head 100oCSK Head Diameter Part Code Grip Hole A B C D E Shear Tensile mm mm mm mm mm mm mm mm KN KN Steel Rivet / Steel Mandrel with Dome Head 4.8 SRDR-0604 1.60-6.35 5.0 4.8 10.5 9.80 2.1 3.0 6.4 4.9 3/16” SRDR-0607XG 1.60-11.1 5.0 4.8 14.5 9.80 2.1 3.0 6.4 4.9 SRDR-0806 2.0-9.5 6.8 6.4 14.2 13.3 2.8 4.0 12.2 9.8 SRDR-0810XG 3.0-16.0 6.8 6.4 20.5 13.3 2.8 4.0 12.2 9.8 6.4 SRDR-0814XG 9.0-22.5 6.8 6.4 26.7 13.3 2.8 4.0 12.2 9.8 1/4” SRDR-0818 21.0-28.5 6.8 6.4 33.3 13.3 2.8 4.0 12.2 9.8 SRDR-0822 25.4-35.0 6.8 6.4 39.0 13.3 2.8 4.0 12.2 9.8 7.8 SRDR-1010XG 3.5-16.0 8.0 7.8 21.0 16.0 3.5 5.1 13.7 9.8 5/16” SRDR-1212 3.0-16.0 10.0 9.5 21.3 20.0 4.0 5.8 26.7 17.8 9.5 SRDR-1218 16.0-29.0 10.0 9.5 35.6 20.0 4.0 5.8 26.7 17.8 3/8” SRDR-1224 25.4-38.1 10.0 9.5 45.0 20.0 4.5 5.8 26.7 17.8 12.7 SRDR-1612 * 3.0-19.0 13.4 12.7 27.7 25.1 6.1 7.8 44.4 31.1 1/2” Steel Rivet / Steel Mandrel with Countersunk Head 100o 4.8 SR100-R605 3.2-8.0 4.9-5.1 4.8 14.1 8.90 1.8 3.0 6.4 4.9 3/16” SR100-R608 7.0-12.7 4.9-5.1 4.8 17.1 8.90 1.8 3.0 6.4 4.9 6.4 SR100-R807 3.2-11.1 6.6-6.9 6.4 18.7 11.0 2.0 4.0 12.2 9.8 1/4” SR100-R812 10.5-18.4 6.6-6.9 6.4 23.1 11.0 2.0 4.0 12.2 9.8 Steel Rivet / Steel Mandrel with Truss Head 4.8 SRTR-0604 1.60-6.35 5.0 4.8 10.5 12.7 1.9 2.9 6.4 4.9 3/16” SRTR-0607 5.4-11.1 5.0 4.8 14.5 12.7 1.9 2.9 6.4 4.9 6.4 SRTR-0806 2.0-9.5 6.8 6.4 14.0 19.5 2.8 4.0 12.2 9.8 1/4” * Check for availability Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. 36 www.rivetlab.com STEVIR LARUTCURTS