Rivstud Series Steel / Flanged Head Flat head with splined body, designed for use in hard metric dimensioned drilled or punched holes. Rivstuds feature a RivNut body with a welded-in-place mating stud and can be used as an alternative to weld-studsor clinch-studs. Rivstuds are also useful to support heavy components on a vertical surface before final assembly is made. Material:Low carbon steel Finish: Zinc clear Cr3 Thread Part Code Grip Hole A B C D E Push Out Pull Out Ultimate Size Torque mm mm mm mm mm mm mm Kgf Kgf Kgf.cm M4 IN-RS0425-15 0.5-2.5 6.0 5.9 12.0 9.0 1.0 15 260 700 30 M5 IN-RS0530-15 0.5-3.0 7.0 6.9 13.0 10.0 1.0 15 370 1000 56 M6 IN-RS0630-20 0.5-3.0 9.0 8.9 15.5 13.0 1.5 20 440 1500 84 M8 IN-RS0830-20 0.5-3.0 11.0 10.9 17.5 16.0 1.5 20 630 1800 340 Dimensions and specifications are subject to change without notice. Check your distributor for the latest data sheet. The test data provides approximate strength values averaged in multiple tests in various materials and thicknesses. We recommend testing your application when an exact strength figure is required, or the load to be applied comes close to the published data. 20 www.rivetlab.com LEETS