2 October 2014 Chapter 36 - Rural Zones One and Two a) Details of the proposed frost fan(s), including make and model, manufacturers’ specifications, blade type and configuration, drive motor details, and design speed of the tips of the blades. b) plan showing the location of the proposed frost fan(s) (with accurate NZTM coordinates) and area it is designed to cover. c) A plan showing the location of the nearest dwelling, visitor accommodation or habitable building, or the nearest zone of a residential nature, and the distance to it. d) Detail of all means to ensure the performance of the frost fan and noise levels remain as predicted, including measures to govern the blade tip speed and the cut-off mechanism for winds exceeding 8 km per hour. e) A report prepared by an appropriately qualified and experienced acoustic consultant addressing the following: • a full and detailed description of the proposed frost fan; • prediction of the noise contours of the proposed frost fan based on operational parameters specifically identified in the report for the particular location where the frost fan is proposed to operate, except where that frost fan has been certified by a body approved by the Council and the proposed fan is to be located and operated in accordance with that certification; 36.2.7.3 Matters Over Which the Council Will Exercise Control The Council reserves control over and may impose conditions with respect to: a) Operational requirements of the frost fans. b) Orientation, rotational constraints, speed of the frost fan power source or frost fan blade set and engine muffling. c) Operation of the frost fan for maintenance purposes. d) Recording information about the use of the frost fan, including temperature and windspeed at the area being protected. e) Monitoring and reporting. f) The provision of contact details for the vineyard owner/ manager. g) The review of conditions. 36 – 25B